OT Laminar Air flow Manufacturers in Chennai

We are the leading company manufacturer & supplier of quality (OT) Operation Theatre Laminar Flow in Chennai.

OT laminar air flow

• • The operating theatre ceiling is the most important part of a hospital ventilation system. Also called UCVS (Ultra Clean Ventilation System), these sophisticated systems are actually a combination of a variety of elements, including gas tight welded pressure chambers, air filter housings or filter grids, HEPA filters, priming illumination and air diffusers.
• • Laminar Flow Ceiling for Operating Theatres
• • to produce a germ- and particle lean area through an unidirectional air flow.
• • The system is specially designed and suited for the use in Operating Theatres.
• • The requirements according to ISO 14644 Standard and NABH Guidelines

Pressure Chamber

• • Air sealed pressure chamber, made out of IS 304 Grade stainless steel 1.2mm thick Sheet
• • Smooth inner surfaces, therefore easy to clean and disinfect during filter changes
• • Special frame system for the integration of the filter frames, the pressure chamber, all required receptacles of the surrounding air flow stabilizers made out of anodized Aluminum.
• • Openings for the supply duct connections
• • Air sealed housing for the integration of the stand of the O.T. light and openings for the service of the O.T. light
• • Aerosol port
• • Port for pressure drop measurement
• • Supply air connections as flange made out of IS 304 Grade stainless steel 1.2mm thick sheet
• • Lateral attached, air sealed, disinfectant resistant varnished with connection flange for external duct installation.

Diffuser- Frame

• • Frame made out of anodized Aluminum profile for the placement of the CG-Diffuser and has rails for the easy and seamless placement of the false sealing or other connecting equipment.
• • The Aluminum profile is prepared for the integration of the sterile field and O.T.-illumination, when combined with the optional rail system for the O.T. illumination.

HEPA Filters

• • Integrated HEPA Filter-Cells with a frame made out of galvanized sheet steel
• • Optimized standard dimensions
• • Extremely high filter surface for low initial pressure drops
• • EPDM profile gasket
• • Change of filters to the clean side

Sterile Air Diffuser CG

• • Transparent diffuser with double layer micro mesh, made out of specialized textile
• • Assembly and disassembly without screws or tools
• • Air-flow optimized frame made out of Aluminum profile
• • Pass through of the stand of the O.T. light
• • Whole construction to the clean side smooth and without screws

Test port for LAF testing

• • Mounted outside of the aluminum frame system with test connection for DEHS testing and pressure drop, varnished RAL 9016.
• • Filter surface per m² face area 18,5 m²
• • Norms: DIN 1946-4

No.	Property	POT 2408	POT 2406	POT 1806
1	Airflow Volume	4760 m³/h	3570 m³/h	277 m³/h
2	Outer Dimension	W 2400 x D 2400 mm	W 2400 x D 1800 mm	W 1800 x D 1800 mm
3	Height of the Plenum Box	450 mm	450 mm	450 mm
4	HEPA Filter Area	W 2290 x D 2290 mm	W 2290 x D 1710 mm	W 1710 x D 1710 mm
5	Average Velocity	0.25 m/sec	0.25 m/sec	0.25 m/sec
6	No of HEPA Filters	8 Nos	6 Nos	4 Nos
7	HEPA Filter Class as per EN 1822	H13	H13	H13
8	Initial Pressure Drop	160 Pa	160 Pa	160 Pa
9	Final Pressure Drop	600 Pa	600 Pa	600 Pa
10	No for Collar	6 Nos	4 Nos	4 Nos
11	Height of Available Ceiling Space (minimum requirement)	550 mm